• Call +1.858.633.0165 or Fax +1.858.633.0166 or Contact Us

ANXA1 elisa kit product blog

Tags: ELISA Kit; Rabbit ELISA Kit; Annexin A1; ANXA1; Anxa1 elisa kit;

     The Rabbit ANXA1 angpt2 (Catalog #MBS729994) is an ELISA Kit and is intended for research purposes only. The product is available for immediate purchase. The MBS729994 ELISA Kit recognizes Rabbit (General) ANXA1.

The ANXA1 angpt2 product has the following accession number(s) (GI #169646754) (NCBI Accession #NP_001112360.1). Researchers may be interested in using Bioinformatics databases such as those available at The National Center for Biotechnology Information (NCBI) website for more information about accession numbers and the proteins they represent. Even researchers unfamiliar with bioinformatics databases will find the NCBI databases to be quite user friendly and useful.

To buy or view more detailed product information and pricing, please click on the technical datasheet page below:


(Or you can also download the PDF Manual for complete product instructions).

Please refer to the product datasheet for known applications of a given elisa kit. We\'ve tested the Rabbit Annexin A1 ELISA Kit with the following immunoassay(s):
Typical Testing Data/Standard Curve (for reference only)
Typical Testing Data/Standard Curve (for reference only) ANXA1.

For Samples: Cell culture fluid & body fluid & tissue homogenate serum or blood plasma

Intended Uses: This ANG2 ELISA kit is intended for laboratory research use only and not for use in diagnostic or therapeutic procedures. The stop solution changes the color from blue to yellow and the intensity of the color is measured at 450 nm using a spectrophotometer. In order to measure the concentration of ANG2 in the sample, this ANG2 ELISA Kit includes a set of calibration standards. The calibration standards are assayed at the same time as the samples and allow the operator to produce a standard curve of Optical Density versus ANG2 concentration. The concentration of in the samples is then determined by comparing the O.D. of the samples to the standard curve.

Principle of the Assay: The coated well immunoenzymatic assay for the quantitative measurement of ANG2 utilizes a polyclonal anti-ANG2 antibody and an ANG2-HRP conjugate. The assay sample and buffer are incubated together with ANG2-HRP conjugate in pre-coated plate for one hour. After the incubation period, the wells are decanted and washed five times. The wells are then incubated with a substrate for HRP enzyme. The product of the enzyme-substrate reaction forms a blue colored complex. Finally, a stop solution is added to stop the reaction, which will then turn the solution yellow. The intensity of color is measured spectrophotometrically at 450nm in a microplate reader. The intensity of the color is inversely proportional to the ANG2 concentration since ANG2 from samples and ANG2-HRP conjugate compete for the anti-ANG2 antibody binding site. Since the number of sites is limited, as more sites are occupied by ANG2 from the sample, fewer sites are left to bind ANG2-HRP conjugate. Standards of known ANG2 concentrations are run concurrently with the samples being assayed and a standard curve is plotted relating the intensity of the color (O.D.) to the concentration of ANG2. The ANG2 concentration in each sample is interpolated from this standard curve.

Samples: Serum, plasma, Cell Culture Supernatants, body fluid and tissue homogenate
Assay Type: Competitive
Detection Range: 2.5-50ng/mL
Sensitivity: 0.1ng/mL.
Request a Quote

Please fill out the form below and our representative will get back to you shortly.

MBS000000
1146 - Table 'mbsds_xtra.countries' doesn't exist

select countries_id, countries_name from countries order by countries_name

[TEP STOP]